The MGMini Lite will come with the wristband already attached.
Putting on the watch:
Examine the band to find the hole that corresponds to the desired fit. There are multiple holes to accommodate different wrist sizes.
Put on the watch and fasten the buckle. Check if the fit is comfortable and secure. Make sure the watch isn’t too tight or too loose.
If the band feels slightly off in terms of comfort or fit, you can fine-tune the fit by choosing a different hole on the band.
.
XL Bands are Available:
If the watch does not fit, call Medical Guardian to receive an XL wristband.
- Standard Wrist band size: 9” L X 1” W
- Wrist band XL size: 10.375” L x 1” W
Replacing the wristband:
Turn the Mini Lite over and locate the small silver quick-release pins on each wrist strap
Remove the existing wristband by sliding the quick-release pin toward the center of the device and pivot the wristband away from the device
Insert the side of the horizontal bar without the quick release into the hole on one side of the device
Slide the quick-release pin toward the center of the device
Pivot the wristband into the device by sliding the quick-release pin back into position once the wristband is firmly in the device.
