How to Charge Freedom 2.0:
Plug the USB cord into the wall charger
Plug the wall charger into a direct wall socket that is not connected to a light switch. Avoid any power strips or power cords.
Connect magnetic prongs on the USB charging cord to the magnetic charging pad at the back of the Freedom 2.0.
When the prongs on the USB cord are properly lined up to the magnetic charging pad, the magnets on both parts will lock into place.
When the watch begins to charge while it is still powered off, the screen will be blank for the first 5 to 10 seconds. Then a battery image will appear on the screen. The image will remain on the screen for 3 seconds, with battery percentage displayed above the image.